In the current packaging industry, in addition to having a wide range of software packaging information, tinplate is also considered to be an outstanding packaging information, with the characteristics of convenient canning and conducive to product storage. Tinplate cans and tin cans are used to decide what kind of cans to use. There are no particular restrictions on planning and application. You are able to use the four general prints or features and the printing works very well; In terms of the quality of gold and silver, it is more real than paper, because the horse iron itself is the material of gold, and it is different from paper in commonly used dimming and post-processing, or bumping. The tinplate printing is flat, coupled with a high temperature of about 280 degrees, so that the ink on the iron sheet emulsifies, makes it bright, and avoids deinking before composition. It's like car paint, so every tin has a paint feel.
The characteristics of steel data are also relatively used and used. Some small gifts and small products are also produced by Makou Steel. They are used a lot in domestic teapots because they are highly repetitive and useful. Steady. Let's discuss the topic of reuse here. In the planning of data or structure, attention should be paid to the convenience of the use of the expander. This benefit. Convenience of use is divided into convenience of use and convenience of post-processing. This is an important factor in the inspection of packaging data, especially the selection of rapid product packaging data. The user can use this product at any time. If the right thing is needed to start or apply the product during the operation, this will be the beginning of product disaster. The consumer is not responsible for such inconvenience.
For example, a horse's mouth iron can be easily turned over and covered with one hand; The illustration below illustrates the planning of the upper and lower lids, but when the upper lid is pressed down, the air inside the tank will be exhausted and will not be easily pulled open until the upper cover meeting opens again;
The next section of the tinplate box cuts out a viewpoint at the top and then presses it with the top of the pit to allow air to inject and make it easier to turn over. These plans are not aesthetic, they are thought from an ergonomic point of view, and are indeed beneficial and satisfying the needs of consumers.
